24/7 Emergency Services Available

LyraSafe Support & Activation Center

Congratulations on purchasing the LyraSafe DIY Home Security!

Plug power supply into LyraSGM and the selected unswitched outlet (no power strips). Preferably near the router.

Plug power supply into LyraSGM

Insert ethernet port into LyraSGM and into the router. If Wi-Fi: Press the WPS button on the router and the LyraSGM enrollment button simultaneously. LyraSGM will beep when successful. (You must purchase the LyraWIFI to have the Wi-Fi option available).

Insert ethernet port into LyraSGM

Check LyraSGM LEDs and ensure they are lit and the Network connectivity is green.

LyraSGM LEDs and ensure

Download the LyraConnect Applications to control your security system.

LyraConnect Applications to control your security system

To sign in, use the user name and password that was provided to you by LyraSafe.

user name and password

Installing the LyraNano:

Remove the LyraNano’s battery tab to activate the sensor. Simply pull the tab away from the housing to enable contact with battery. Peel the mounting tape of the LyraNano sensor and mount it on the door or window frame, and mount the magnet aligning to the sensor marked. (If needed you can mount the sensor on the door and magnet on the frame).

Installing the LyraNano

To test the LyraNano, arm the system using your smart device and break contact from the magnet by opening the door or window where LyraNano is installed. If installed correctly, LyraSGM will sound the alarm. Disarm the system by entering your code on your smart device or keypad. If LyraSGM doesn’t sound, refer back to the installation video to troubleshoot the problem.

LyraNano

Installing the LyraPIR:

Remove the cover on the LyraPIR. Remove the battery tab to activate the sensor. Ensure battery maintains connection.

LyraPIR

Mount in designated location using included screws or mounting tape.

designated location

To test the LyraPIR, arm the system using the LyraConnect to “Arm Away” mode on keypad or smart device. Wait 2.5 mins before entering the room the PIR is installed in. Walk in front of PIR. If LyraSGM sounds, disarm.

Installing the LyraSmoke and LyraCO:

Activate the sensor by removing the battery tab. Lift battery door cover, remove tab, replace cover. Ensure battery connection.

Installing the LyraSmoke and LyraCO:

Install the Smoke or CO in the designated zone location. Refer to manuals for proper placement and regulations.